A 10-yard bin measures roughly 12 feet long by 8 feet wide by 3.5 feet tall and holds approximately 4 pickup-truck loads of debris, the right fit for a single-room gut, a bathroom tile tear-out, or a garage floor demo…

A 10-yard bin measures roughly 12 feet long by 8 feet wide by 3.5 feet tall and holds approximately 4 pickup-truck loads of debris, the right fit for a single-room gut, a bathroom tile tear-out, or a garage floor demo in Meadow Lark or the Poly Drive Corridor. A 20-yard bin, at about 22 feet long and 4.5 feet tall, holds roughly 8 pickup loads and covers a kitchen remodel, a full interior demo on a mid-size Heights bungalow, or a siding replacement on a West End ranch home. The 30-yard and 40-yard bins are built for larger commercial framing jobs, full roof tear-offs on MetraPark-area commercial properties, or multi-trade remodels where concrete, lumber, and drywall are coming out simultaneously, the 40-yard holds approximately 16 pickup loads of mixed construction waste.
Flat-rate pricing removes the most common jobsite headache: an invoice that grows between delivery and pickup. Every Dump Well construction bin is priced all-in, the $795 for a 30-yard covers delivery to a Lockwood framing site, the rental period, and pickup when the job phase wraps, with no separate line item for weight, fuel, or environmental fees. That structure matters on a permitted renovation where the contractor's draw schedule depends on predictable costs. If the project runs a day long, a one-day extension is available, offered upfront, not extracted at pickup.
Billings construction crews deal with conditions that affect bin placement: the clay-heavy soil in the South Side and Billings Heights can shift under a loaded 40-yard bin placed on unprepared ground, and alley access in older Downtown Billings blocks sometimes limits bin length to 20 yards or under. On street placements near Rimrock or along the Heights corridor, Yellowstone County may require a right-of-way permit, confirm with the county before scheduling if the bin will sit on a public street rather than a driveway or private lot. The driver places the bin on lumber planks to protect paved surfaces when requested; note that on gravel or dirt pads no planks are needed and placement is faster.
Decision guidance: a single-trade job, roofing, flooring, drywall, almost always fits a 10-yard or 15-yard bin and keeps cost at $595 or $650. A multi-trade remodel where demo, framing, and finish debris accumulate over two or more weeks fits a 20-yard or 30-yard better; renting up one size costs $45 to $100 more than the smaller option and avoids a second delivery charge if the smaller bin fills early. The 40-yard at $895 is reserved for new construction framing waste, large commercial demo, or full gut-renovations on structures over 2,000 square feet, the trade-off is driveway footprint (roughly 22 feet) versus debris capacity (up to 16 loads).
Every job gets a firm, written price after a free on-site visit.
Tell us about your construction dumpster rental job in Billings and we'll send a clear, written quote, usually the same day.